PoE Extender
Outdoor use weather-proof Single port PoE extender- a quality product for PoE
network point-to-point up to 500m. Works with PoE standards IEEE802.3af and IEEE802.3at. This device serves as a data switch port that is powered by PoE, and transmits it further on another 100m together with the data. Depending on the amount of power consumption. may use up to 4 extensions in the same chain, thereby increasing transmission distance up to 500m (1 class 82.3af, see table. “Maximum distance”)
Features
- Industrial Grade -40 to 70℃
- Mini-size, wall mounting
- Requires no external power supply
- Low power consumption, only 1.2W
- Auto-sensing PoE devices
- Compatibility with 802.3at and 802.3af
Typical Connection Diagram
PoE Device (PD) | PoE Injector or Switch | PoE Plus Injector or Switch |
IEEE802.3af class 1 no more than 4W | 400m (3pcs PoE Extender) | 500m (4pcs PoE Extender) |
IEEE802.3af class 2 no more than 6W | 300m (2pcs PoE Extender) | 400m (3pcs PoE Extender) |
IEEE802.3af class 0&3 no more than 12W | 200m (1pcs PoE Extender) | 300m (2pcs PoE Extender) |
IEEE802.3at no more than 22W | Not applicable | 200m (1pcs PoE Extender) |
Maximum Distance for Power Source
Multiple PoE Extenders can be connected every 100 meters to obtain greater distances. The actual figures depend on operating conditions.
The range is over 24 AWG or heavier Cat-5e or Cat-6 cable except where specified.
Examples for medium power PoE Devices (that are PoE Class 2, or require under 6 watts)
| PoE Source | |||
| PoE switch (802.3af,Output voltages 50V) | 15W mid-span (802.3af,Output voltages 50V) | PoE+ switch (802.3at,Output voltages 50V) | 30W mid-span (802.3at,Output voltages 50V) |
| Maximum Distances | |||
| 300m | 300m | 400m | 400m |
Examples for full power PoE Devices (that are PoE Class 0 or 3, or require under 12 watts)
| PoE Source | |||
| PoE switch (802.3af,Output voltages 50V) | 15W mid-span (802.3af,Output voltages 50V) | PoE+ switch (802.3at,Output voltages 50V) | 30W mid-span (802.3at,Output voltages 50V) |
| Maximum Distances | |||
| 200m | 200m | 300m | 300m |
Examples for PoE+ Devices (that are PoE Class 4 that under 22 watts, or 802.3at compliant)
| PoE Source | |||
| PoE switch (802.3af,Output voltages 50V) | 15W mid-span (802.3af,Output voltages 50V) | PoE+ switch (802.3at,Output voltages 50V) | 30W mid-span (802.3at,Output voltages 50V) |
| Maximum Distances | |||
| Not applicable | Not applicable | 200m | 200m |
No. of channels:1
•Pass Through Data Rates:10/100/1000 Mbps half / full duplex
•PoE input
Pin Assignment and Polarity: Both 1/2 (-), 3/6 (+) and 7/8 (-), 4/5 (+)
•PoE output
Pin Assignment and Polarity: 1/2 (-), 3/6 (+)
Output Power: up to 22W
•Indicators
Power indicator: PoE enabled
Network indicator: Link/Act
•Connectors:Shielded RJ-45, EIA 568A and 568B
•Network cables:Shielded category 5 (or higher)
•Case material:ABS plastic
•Dimensions:145mm x 60mm x 40mm
•Weight:0.090g
•Mounting:Wall of shelf
•Environment:Indoor
•Environmental Conditions
Operating Ambient Temperature: -40 to 45℃ @90%, Non-condensing
Storage Temperature: -40 to 70 @95%, Non-condensing
•Regulatory Compliance
IEEE 802.3af (PoE), IEEE 802.3at (PoE+)
RoHS Compliant, CE, FCC
•Electromagnetic:FCC Part15, Class B
